# Ignimbrite

- Page: https://taslar.bumba.tr/en/stones/ignimbrite/
- Turkish: İgnimbirit
- Also known as: Ash-flow tuff, Welded tuff (welded varieties), Ahlat stone (local name of the ignimbrite of Ahlat, Türkiye), Sillar (Arequipa, Peru)
- Kind: Rock
- Classification: Rocks › Igneous rocks › Extrusive (volcanic)
- Hardness (Mohs): 5–6
- Specific gravity: 1.2–2.6 g/cm³
- Colours: cream, beige, pink, reddish brown, brown, black, grey
- Composition: Shards of volcanic glass, pumice fragments, crystal fragments (feldspar, quartz, pyroxene, biotite) and rock fragments carried by a pyroclastic flow. Usually silica-rich (dacitic, rhyolitic or trachytic) in composition.
- Texture: Poorly sorted: pumice and rock fragments of many sizes in a fine ash matrix. In layers deposited while still hot, pumice fragments are flattened into dark, flame-shaped lenses (fiamme) and the rock becomes hard and welded; unwelded varieties are soft and porous.
- Value ladder: 3/9 step, Building and industrial stone
- Last checked: 2026-10-04

The rock left by glowing avalanches of hot ash — the stone of the Seljuk gravestones of Ahlat.

Ignimbrite is a rock made from the deposits of fast-moving clouds of hot ash, pumice and gas that rush down a volcano’s slopes during huge eruptions. If the material is still very hot when it settles, the grains fuse together into a hard stone. Because it is easy to work, it has been used for centuries in Ahlat, in Türkiye’s Bitlis province, for buildings and gravestones.

## How does it form?

In large explosive eruptions, the column of ash and pumice blasted into the air can collapse under its own weight and turn into a glowing avalanche of hot gas and ash that races down the slopes close to the ground (a **pyroclastic flow**). These flows fill valleys, sweep over hills and can travel many kilometres. The mixture of ash, pumice and rock fragments they leave behind when they stop is called ignimbrite. If the material is still very hot when it settles, the glass shards soften under their own weight and fuse into a hard, dense **welded tuff**; parts that settle cooler remain soft and porous.

## What is it used for?

- **Building and carving stone:** Because it is easy to cut and carve, it is used for houses, mosques, churches and gravestones. The Seljuk gravestones of Ahlat and the historic buildings of Arequipa in Peru, made of an ignimbrite called “sillar”, are well-known examples.
- **Rock-cut settlements:** In Cappadocia, houses, churches and dovecotes were carved directly into ignimbrite and tuff.
- **Science:** Ignimbrites record the giant explosive eruptions of the past. By studying their age, thickness and extent, scientists try to estimate how large the future eruptions of a volcano might be.

## Ignimbrite in Türkiye

Around **Ahlat**, on the north-western shore of Lake Van, there are layers of ignimbrite laid down by eruptions of the region’s volcanoes. This light, easily carved stone in shades of red, brown, black and beige is known locally as “Ahlat stone”. The carved gravestones of the **Ahlat Seljuk Cemetery**, which is on UNESCO’s World Heritage Tentative List, and nearby monuments are made of this ignimbrite. However, the stone’s high porosity and capillary water uptake have caused serious decay of the gravestones over the centuries.

The **Nevşehir plateau** in Cappadocia is also covered by a stack of many ignimbrite sheets laid down over millions of years; they make up much of the soft volcanic rock of the fairy-chimney landscape.

## How to recognise it

- Pale pumice fragments and dark rock chips of many sizes sit in a fine ash matrix; the grains are not sorted by size.
- In welded varieties the pumice fragments are flattened into dark, flame-shaped lenses (fiamme).
- Unwelded varieties are light, porous and easy to carve; welded varieties are harder and denser.
- It does not fizz in dilute acid, which tells it apart from limestone and travertine that can look similar.

## Fakes and imitations

- Local stone names do not reveal the rock type: “Ahlat stone” is called andesite in some sources, but scientific studies show that it is ignimbrite.
- Welded ignimbrite can be mistaken for lava; look for flattened pumice lenses and angular rock fragments to tell them apart.
- Ignimbrites sold as dressed stone vary widely in durability; porous types soak up water by capillary action and can crumble over time.

## What determines its value?

Ignimbrite is a local building stone; its value depends on whether sound blocks of even texture can be quarried, on how easily it can be cut and carved, and on its colour and durability. Welded, less porous types last longer on exterior walls and are therefore preferred, whereas very porous types can soak up water and crumble over time. The value of local stones used in historic buildings, such as Ahlat stone, lies largely in their cultural heritage.

This information is educational, not buying, selling or investment advice. Value varies enormously with quality and treatment.

## Myths and misconceptions

- Myth: The fairy chimneys of Cappadocia are made of lava. Fact: Most of the soft rock the fairy chimneys are carved from is not lava but ignimbrite and tuff laid down by pyroclastic flows. The chimneys formed as wind, rain and floodwater wore these soft rocks away.
- Myth: Volcanic rocks are always black and heavy. Fact: Lavas such as basalt are dark and heavy, but rocks left by explosive eruptions, such as ignimbrite and pumice, are often cream, beige, pink or brown, and are lighter than lava because they are porous.

## Did you know?

- The 1912 eruption of Novarupta in Alaska was the largest volcanic eruption of the 20th century; its ignimbrite filled the valley later named the “Valley of Ten Thousand Smokes”.
- The historic centre of Arequipa in Peru is built largely of white and pinkish ignimbrite called “sillar”, and has been on the UNESCO World Heritage List since 2000.

## Where is it found?

- Ahlat, Bitlis, Türkiye (Historic source): The ignimbrite known locally as “Ahlat stone” was used for the gravestones of the Ahlat Seljuk Cemetery, on UNESCO's World Heritage Tentative List, and for nearby monuments.
- Nevşehir Plateau, Cappadocia, Türkiye (Major deposit): A plateau covered by a stack of Neogene ignimbrite sheets, which make up much of the soft volcanic rock of the fairy-chimney landscape.
- Valley of Ten Thousand Smokes, Katmai, Alaska, USA (Major deposit): The ignimbrite of the 1912 Novarupta eruption, the largest eruption of the 20th century, fills the valley.
- Arequipa, Peru (Historic source): Its historic centre is built mostly of white and pinkish ignimbrite called “sillar”; on the UNESCO World Heritage List since 2000.
- Long Valley Caldera, California, USA (Known locality): The Bishop Tuff, left by a huge eruption about 760,000 years ago, is 1,500 metres thick on the caldera floor.
- Lake Toba, Sumatra, Indonesia (Major deposit): About 2,000 km³ of ignimbrite flowed over the ground in the eruption some 74,000 years ago, the trace of one of the largest known eruptions.
- Campi Flegrei, Naples, Italy (Known locality): The hot flows of the Campanian Ignimbrite eruption, about 39,500 years ago, spread over an area of about 30,000 km².
- Taupō Volcano, North Island, New Zealand (Known locality): The Oruanui eruption, about 25,700 years ago, left ignimbrite layers up to 200 metres thick.

## Documentaries

- [Epic Cappadocia Volcanism 2: Ignimbrite](https://www.youtube.com/watch?v=KXSXEY5AL3A), Fred Jourdan (English)
- [Kapadokya'nın Jeolojik Serüveni](https://www.youtube.com/watch?v=WQ8oGEl2vGc), HT Bilim Tarih Felsefe (Turkish)

## Sources

- [Long Valley Caldera](https://en.wikipedia.org/wiki/Long_Valley_Caldera), Wikipedia
- [Lake Toba (Youngest Toba eruption)](https://en.wikipedia.org/wiki/Lake_Toba), Wikipedia
- [Campanian Ignimbrite eruption](https://en.wikipedia.org/wiki/Campanian_Ignimbrite_Eruption), Wikipedia
- [Oruanui eruption](https://en.wikipedia.org/wiki/Oruanui_eruption), Wikipedia
- [Ash-flow tuff](https://www.britannica.com/science/ash-flow-tuff), Encyclopaedia Britannica
- [Experimental studies on ignimbrite and the effect of lichens and capillarity on the deterioration of Seljuk Gravestones (Özvan et al.)](https://doi.org/10.1016/j.enggeo.2014.12.001), Engineering Geology, 2015
- [Stratigraphy and age of the Cappadocia ignimbrites, Turkey (Le Pennec et al.)](https://doi.org/10.1016/j.jvolgeores.2004.09.004), Journal of Volcanology and Geothermal Research, 2005
- [The Novarupta-Katmai eruption of 1912 — largest eruption of the twentieth century; centennial perspectives](https://pubs.usgs.gov/pp/1791/), U.S. Geological Survey, Professional Paper 1791, 2012
- [Historical Centre of the City of Arequipa](https://whc.unesco.org/en/list/1016/), UNESCO World Heritage Centre
- [A digital rock density map of New Zealand (Tenzer, Sirguey, Rattenbury & Nicolson)](https://doi.org/10.1016/j.cageo.2010.07.010), Computers & Geosciences 37 (8), 1181–1191, 2011
- [Welded tuff: Identification, Properties & Lookalikes](https://rockhounding.org/rocks/welded-tuff), Rockhounding.org


Source: https://taslar.bumba.tr/en/stones/ignimbrite/ · Licence: CC BY-SA 4.0
